| Home | E-Submission | Sitemap | Login | Editorial Office |  
top_img
   
REVIEW ARTICLE March 31 2021
Research progress of defective MoS2 for photocatalytic hydrogen evolution
The potential application of MoS2 as a potential H2 precipitation photocatalyst has received widespread attention and is considered a promising alternative to precious metal cocatalysts due to its richness and low cost. However, the catalytic active center of MoS2 is only along...
REVIEW ARTICLE March 31 2021
Synthesis, property, and application of carbon nanotube fiber
Carbon nanotube (CNT) fi ber (CNTF), which is a collection of many CNTs aligned along the fiber axis, has attracted significant attention as a next-generation material with excellent properties. CNTF is a macroscopic material that potentially resembles the intrinsic properties ...
ORIGINAL ARTICLE March 31 2021
High-temperature viscosity analysis of aluminosilicate melts and the comparison to empirical models
Understanding the high-temperature viscosity of aluminosilicate near liquid–solid transition is important in the metallurgical industry and fiberization processes, but the experimental determination of viscosity is time and cost consuming. To date, a number of viscosity models ...
Current Issue
Volume 58(2); March 2021
Volume 58(1); January 2021
Volume 57(6); November 2020
Volume 57(5); September 2020
Volume 57(4); July 2020
RSS feed
Review Articles
135 Research progress of defective MoS2 for photocatalytic hydrogen evolution
Chao Liu, Cui Kong, Feng-Jun Zhang, Chun-Mei Kai, Wei-Qin Cai, Xian-Yang Sun, Won-Chun Oh
J. Korean Ceram. Soc. 2021;58(2):135-147.   Published online March 31, 2021
DOI: https://doi.org/10.1007/s43207-020-00103-3
      
148 Synthesis, property, and application of carbon nanotube fiber
Sung-Hyun Lee, Ji Hong Park, Seung Min Kim
J. Korean Ceram. Soc. 2021;58(2):148-159.   Published online March 31, 2021
DOI: https://doi.org/10.1007/s43207-020-00106-0
      
Original Articles
160 High-temperature viscosity analysis of aluminosilicate melts and the comparison to empirical models
Hyunseok Ko, Myounguk Kim, Sun-Min Park, Hyung Mi Lim
J. Korean Ceram. Soc. 2021;58(2):160-168.   Published online March 31, 2021
DOI: https://doi.org/10.1007/s43207-020-00078-1
      
169 Observation of fault-free coherent layer during Ruddlesden–Popper faults generation in LaNiO3 thin films
Jumi Bak, Sung-Yoon Chung
J. Korean Ceram. Soc. 2021;58(2):169-177.   Published online March 31, 2021
DOI: https://doi.org/10.1007/s43207-020-00080-7
      
178 Characteristics of HfN coatings by inductively coupled plasma-assisted magnetron sputtering
Sung-Yong Chun
J. Korean Ceram. Soc. 2021;58(2):178-183.   Published online March 31, 2021
DOI: https://doi.org/10.1007/s43207-020-00084-3
      
184 Application of CFD simulation to silicon carbide deposition for nozzles with funnel
Jin-Won Seo, Kyoon Choi
J. Korean Ceram. Soc. 2021;58(2):184-191.   Published online March 31, 2021
DOI: https://doi.org/10.1007/s43207-020-00082-5
      
192 Thermal durability of ytterbium silicate environmental barrier coating prepared by suspension plasma spray
Soo Min Park, Sahn Nahm, Yoon Suk Oh
J. Korean Ceram. Soc. 2021;58(2):192-200.   Published online March 31, 2021
DOI: https://doi.org/10.1007/s43207-020-00086-1
      
201 Sono-synthesized Fe3O4–GO–NH2 nanocomposite for highly efficient ultrasound-assisted magnetic dispersive solid-phase microextraction of hazardous dye Congo red from water samples
Phitchan Sricharoen, Saksit Chanthai, Natthida Lamaiphan, Chinawooth Sakaew, Nunticha Limchoowong, Prawit Nuengmatcha, Won-Chun Oh
J. Korean Ceram. Soc. 2021;58(2):201-211.   Published online March 31, 2021
DOI: https://doi.org/10.1007/s43207-020-00089-y
      
212 Vermiculite-polyethylene hybrid packaging films for keep-freshness of bananas with enhanced oxygen and water–vapor permeability
Sun Bok Cho, Jeong Ho Chang
J. Korean Ceram. Soc. 2021;58(2):212-218.   Published online March 31, 2021
DOI: https://doi.org/10.1007/s43207-020-00091-4
      
219 Low-temperature sintering behaviors in a titanium oxide–copper oxide system through two-step heat treatment
Jae-Yong Woo, Kyung-Sik Oh, Tai-Joo Chung, Hyuk-Jae Lee, Yeong-Kyeun Paek
J. Korean Ceram. Soc. 2021;58(2):219-224.   Published online March 31, 2021
DOI: https://doi.org/10.1007/s43207-020-00092-3
      
225 Phase evolution, microstructure and dielectric properties of electrospun Ba(Zr0.2Ti0.8)O3–0.5(Ba0.7Ca0.3)TiO3
Amir Mahdi Molavi, Parvin Alizadeh
J. Korean Ceram. Soc. 2021;58(2):225-235.   Published online March 31, 2021
DOI: https://doi.org/10.1007/s43207-020-00093-2
      
236 A comparative study of the compressive strengths and microstructural properties of geopolymer cements from metakaolin and waste fired brick as aluminosilicate sources
Hamed I. Riyap, Charles Banenzoué, Hervé Kouamo Tchakouté, Charles N. P. Nanseu, Claus H. Rüscher
J. Korean Ceram. Soc. 2021;58(2):236-247.   Published online March 31, 2021
DOI: https://doi.org/10.1007/s43207-020-00097-y
      
E-Submission
Email Alert
Author's Index
Specialties
ceramic
SCImago Journal & Country Rank
Scopus
GoogleScholar
Similarity Check
Crossref Cited-by Linking
CrossMark
Funder Registry
ORCID
COPE
KOFST
Editorial Office
Meorijae Bldg., Suite # 403, 76, Bangbae-ro, Seocho-gu, Seoul 06704, Korea
TEL: +82-2-584-0185   FAX: +82-2-586-4582   E-mail: ceramic@kcers.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Ceramic Society. All rights reserved.                      Developed in M2PI