| Home | E-Submission | Sitemap | Login | Editorial Office |  
top_img
            
REVIEW ARTICLE April 30 2020
Recent progress of two‑dimensional materials and metal–organic framework‑based taste sensors
In food industries, the detection of different tastes in low level is required to enhance the quality of products. Recently, 2-D materials and metal–organic framework (MOF) have attracted extensive attention owing to their unique properties, and they can be used in various appl...
REVIEW ARTICLE April 30 2020
Review on characteristics of metakaolin‑based geopolymer and fast setting
The setting of metakaolin-based geopolymer depends on the raw materials and mix proportions. Setting, when material is cured at room temperature, takes about 1 day and is longer than setting time of Portland cement. For the fast setting of geopolymers, some studies increased the...
ORIGINAL ARTICLE April 30 2020
Pore structure and possibility of fine dust removal for bottom ash sand
In this study, bottom ash sand was classified into sizes of 0.15 mm or less, 0.15∼0.6 mm, 0.6∼1.2 mm, 1.2∼2.5 mm, and 2.5∼5 mm by sand size. The results were evaluated with regard to fine dust removal. The bottom ash sand showed hysteresis in the adsorption and desorption...
ORIGINAL ARTICLE April 30 2020
Effect of boron addition on the phase‑transition temperature of CoPt‑B nanoparticles synthesized by sol–gel autocombustion using sago starch as a chelating agent
In this research, we reported the effect of boron addition on the phase-transition temperature of CoPt-B nanoparticles using a sol–gel autocombustion method. Sago starch was used as a chelating agent. From the results, the suitable values of the sago starch concentration, boron...
ORIGINAL ARTICLE April 30 2020
Strontium‑substituted biphasic calcium phosphate scaffold for orthopedic applications
Strontium ion-substituted calcium phosphate-based ceramic scaffolds enhance osteogenesis. The objective of the present study was to optimize the strontium hydroxyapatite (Sr-HA) and beta tricalcium phosphate (β-TCP) ratio in the fabricated scaffolds to enhance their mechanical s...
ORIGINAL ARTICLE April 30 2020
(K,Na)NbO3‑LiNbO3 nanocube‑based flexible and lead‑free piezoelectric nanocomposite energy harvesters
The research on harvesting the wasted mechanical energy and using it as a useful energy source has been in the spotlight. Conventional ceramic-based devices have disadvantages such as mechanical brittleness and high-temperature processing. To overcome these weaknesses, the piezo...
ORIGINAL ARTICLE April 30 2020
Electrochemical properties of Sr‑doped layered perovskite as a promising anode material for direct hydrocarbon SOFCs
A direct utilization of hydrocarbon fuels in solid-oxide fuel cell (SOFC) has been considered a worthwhile and realizable goal. Admittedly, while great strides have been made toward this development goal, there still remain Ni-based anode materials issues to be resolved. In this...
ORIGINAL ARTICLE April 30 2020
Oxygen nonstoichiometry and electrical properties of La2–xSrxNiO4+δ (0 ≤ x ≤ 0.5)
The amount of interstitial oxygen (δ) in Sr-doped lanthanum nickel oxide ( La2–xSrxNiO4+δ) as a function of Sr content has been investigated by the thermogravimetry analysis (TGA) and X-ray photoelectron spectroscopy (XPS). La2–xSrxNiO4+δ (0 ≤ x ≤ 0.5) ceramics were pr...
ORIGINAL ARTICLE April 30 2020
Fabrication of the novel Fe2+ αO3+α–CoFe2O4 composite fibers and their magnetic properties
Soft-hard magnetic composites have attracted much attention as magnetic materials for permanent magnets due to high coercivity and saturation magnetization in various fields such as motor, storage device and magnetic actuators. Hard magnetic materials with low saturation magneti...
ORIGINAL ARTICLE April 30 2020
Syntheses and characterizations of complex perovskite oxynitrides (Ca, Sr, Ba)TaO2N
The syntheses, crystal structures, thermal decomposition, and optical absorbance spectra of the tantalum-based complex perovskite oxynitrides Ca1/2Sr1/2TaO2N, Sr1/ 2Ba1/2TaO2N, and Ca1/3Sr1/3Ba1/3TaO2N were investigated. Synchrotron X-ray Rietveld refinement showed that Ca1/2Sr1...
ORIGINAL ARTICLE April 30 2020
Synthesis and characterization of MnO2 added ( Na0.475K0.475Li0.05) (Nb0.9Ta0.05Sb0.05)O3 lead‑free piezoelectric ceramics
Lead-free NKLNTS ceramics with promising piezoelectric properties were fabricated using the solid phase method, which is a general ceramic manufacturing method. MnO2 was added to NKLNTS ceramics as a sintering aid to improve piezoelectric and dielectric properties. The added MnO...
ORIGINAL ARTICLE April 30 2020
Preparation of porous cordierite ceramic with acid‑leached coal gangue
The effect of impurities in coal gangue on the sintering and properties (porosity and compressive strength) of porous cordierite ceramics has been investigated by adjusting the amount of impurities by controlling the acid–gangue ratio during acid leaching. The sintering behavio...
Current Issue
Volume 57(4); July 2020
Volume 57(3); May 2020
Volume 57(2); March 2020
Volume 57(1); January 2020
Volume 56(6); November 2019
RSS feed
E-Submission
Email Alert
Author's Index
Specialties
ceramic
SCImago Journal & Country Rank
Scopus
ScienceCentral
GoogleScholar
Similarity Check
Crossref Cited-by Linking
CrossMark
Funder Registry
ORCID
COPE
KOFST
Editorial Office
Meorijae Bldg., Suite # 403, 76, Bangbae-ro, Seocho-gu, Seoul 06704, Korea
TEL: +82-2-584-0185   FAX: +82-2-586-4582   E-mail: ceramic@kcers.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Ceramic Society. All rights reserved.                      developed in m2community