| Home | E-Submission | Sitemap | Login | Contact Us |  
J. Korean Ceram. Soc. > Volume 42(2); 2005 > Article
Journal of the Korean Ceramic Society 2005;42(2): 88.
doi: https://doi.org/10.4191/kcers.2005.42.2.088
Ti-Al-Si-N 코팅막의 마모거동에 미치는 Si 함량의 영향
진형호, 김정욱, 김광호, 윤석영
부산대학교 재료공학부
The Effect of Si Content on the Tribological Behaviors of Ti-Al-Si-N Coating Layers
Hyeong-Ho Jin, Jung-Wook Kim, Kwang-Ho Kim, Seog-Young Yoon
School of Materials Science and Engineering, Pusan National University
Ti-AI-Si-N coating layers were deposited on WC-Co substrates by a hybrid system of arc ion plating and sputtering techniques. The coatings were prepared with different Si contents to investigate the effect of Si content on their mechanical properties and microstructures. The dry sliding wear experiments were conducted on Ti-AI-Si-N coated WC-Co discs at constant load, 3N, and sliding speed, 0.1 m/s with two different counterpart materials such as steel ball and zirconia ball using a conventional ball-on-disc sliding wear apparatus. In the case of steel ball, the friction coefficient of Ti-AI-Si-N coating layers became lower than that of Ti-AI
Key words: Ti-Al-Si-N, Tribology, Wear, Hybrid system
Editorial Office
Meorijae Bldg., Suite # 403, 76, Bangbae-ro, Seocho-gu, Seoul 06704, Korea
TEL: +82-2-584-0185   FAX: +82-2-586-4582   E-mail: ceramic@kcers.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Ceramic Society.                      Developed in M2PI