| 압축성형공정에 대한 알루미나 성형체 밀도분포의 FE 분석 |
| 임종인, 육영진 |
| 요업(세라믹)기술원 시뮬레이션센터/전자부품팀 |
| FE Analysis of Alumina Green Body Density for Pressure Compaction Process |
| Jong-In Im, Young-Jin Yook |
| Simulation Center for Fine Ceramics/Electronic Device Team, KICET |
|
|
|
|
|
| ABSTRACT |
|
For the pressure compaction process of the ceramic powder, the green density is very different with both the ceramic body shape and the processing conditions. The density difference cause non-uniform shrinkages and deformations, and make cracks in the sintered ceramics. In this paper, Material properties of the alumina powder mixed with binder and the friction coefficient between the powder and the tool set were determined through the simple compaction experiments: Also the powder flow characteristics were simulated and the green density was analyzed during the powder compaction process with Finite Element Method (FEM). The results show that the density distributions of the green body were improved at the optimized processing condition and both the possibility of the farming crack generation and rho deformation of the sintered Alumina body were reduced. |
| Key words:
Alumina powder, Pressure compaction process, FEM, Green body density |
|
|
|
PDF Links
Full text via DOI
Download Citation 
