Float 공법을 고려한 Plasma Display Panel용 기판유리 용융체의 특성 |
김기동, 정우만, 정현수, 권성구, 최세영1 |
군산대학교 신소재공학과 1연세대학교 신소재공학부 |
Melt Properties of Plasma Display Panel Substrate Glasses Based on Float Process |
Ki-Dong Kim, Woo-Man Jung, Hyun-Su Jung, Sung-Ku Kwon, Se-Young Choi1 |
Department of Materials Science and Engineering, Kunsan National University 1Department of Ceramic Engineering, Yonsei University |
|
|
|
ABSTRACT |
In order to examine the working condition of melts in tin bath of float process it was investigated Sn diffusion behavior and solidification rate of melts for alkali-alkaline earth-silica PDP substrate glasses such as commercial CaO rich CS-77 glass, commercial $Al_2O_3$ rich PD-200 glass and self developed $SiO_2$ rich T-series (T-2, T-4, T-6) glasses. In the case of Sn depth and concentration created in glass surface by ion exchange between Sn and alkali, T-series showed lower value than CS-77, especially T-2 is more excellent than PD-200. The solidification rate of melts expressed by cooling time between $log{eta}=4;and;7.6dPa{cdot}s$ was low for T-series comparing with CS-77 and PD-200. Therefore, it was concluded that T-series is desirable considering forming condition in the tin bath of the float process. |
Key words:
Substrate glass, PDP, Glass composition, Sn depth and concentration, Solidification rate, Tin bath, Float process |
|
|
|