| Home | E-Submission | Sitemap | Login | Contact Us |  
J. Korean Ceram. Soc. > Volume 40(2); 2003 > Article
Journal of the Korean Ceramic Society 2003;40(2): 123.
doi: https://doi.org/10.4191/kcers.2003.40.2.123
Effects of Process Parameters on the Coating Properties of APS TiO2 ioceramic Coatings
Hak-Kwak Kim, Ju-Woong Jang, Byoung-Soo Kim, Ji-Woong Moon1, Deuk-Yong Lee2, Chang-Hee Lee3
Woory Dong Myung Dental Material Research Center
1Pottery Research Center, Korea Institute of Ceramic Engineering and Technology
2Department Materials Engineering, Daelim College of Technology
3Division of Materials Science and Engineering, Hanyang University
The effects of process parameters on coating formation and coating properties were investigated using a fused and crushed Ti $O_2$powder by the Taguchi method and L$_{9}$(3$^4$) orthogonal array. The Taguchi analysis was conducted through the results of the coating properties affected strongly by plasma spraying parameters and Ti $O_2$powder was sprayed on Ti-6Al-4V alloy substrate. The coating properties were characterized by thickness, microhardness, porosity and surface roughness using optical microscopy, image analyzer and surface roughness tester respectively. An observed optimum condition of plasma spraying process could be found for potential use as a bioceramic coating.Ѐ䔀Ѐ䔀Ѐࠀ䄀厧Ā厧Ā̀￿￿郧ﺖ⨀聰㘂낹﾿缀偫—⨀⁉—⨀—⨀Ȁj—⨀—⨀Ā 砨—⨀—⨀开Āᣪﺖ⨀䂥ﺖ⨀ሀ碤ﺖ⨀ሀ䂥ﺖ⨀ሀ㑧잖⨀ࠀ㤝ᦨĀᦨĀ̀￿￿㑧잖⨀厧Āᢦﺖ⨀墦ﺖ⨀磬ﺖ⨀硠ﺖ⨀ﺖ⨀ԀĀࢦﺖ⨀Ѐ褎돀ハﺖ⨀塨
Key words: Taguchi analytical method $TiO_2$, Plasma spraying, Surface roughness, Porosity, Microhardness
Editorial Office
Meorijae Bldg., Suite # 403, 76, Bangbae-ro, Seocho-gu, Seoul 06704, Korea
TEL: +82-2-584-0185   FAX: +82-2-586-4582   E-mail: ceramic@kcers.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Ceramic Society. All rights reserved.                      Developed in M2PI