| Home | E-Submission | Sitemap | Login | Contact Us |  
J. Korean Ceram. Soc. > Volume 33(11); 1996 > Article
Journal of the Korean Ceramic Society 1996;33(11): 1253.
다층세라믹스 제조시 적층 공정 변수에 따른 수축율 조절
성재석, 구기덕1, 윤종광1
연세대학교 세라믹공학과
Shrinkage Control with Variation of Lamination Condition in Multilayer Ceramics
In the fabrication of alumina-based multilayer ceramics sintering shrinkages with lamination conditions such as lamination pressure temperature and laminating with and without press die were compared. The sintering shrinkage was affected substantially by lamination pressure and temperature and in the case of laminatino without press die the lower laminated density and a large difference in shrinkage with direction were observed. These results can be explained by introducing a new factor which is the ratio of the changes of areas before and after lamination.
Key words: Multilayer ceamics, Alumina, Skrinkage, lamination, Press die
PDF Links  PDF Links
Full text via DOI  Full text via DOI
Download Citation  Download Citation
Related articles
Changes of Camber on Lamination Conditions in alumina/Tungsten Cofiring Multilayer Package  1997 ;34(6)
Determination of Optimum Condition in Plasma Spraying Process  1996 ;33(2)
Editorial Office
Meorijae Bldg., Suite # 403, 76, Bangbae-ro, Seocho-gu, Seoul 06704, Korea
TEL: +82-2-584-0185   FAX: +82-2-586-4582   E-mail: ceramic@kcers.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Ceramic Society.                      Developed in M2PI