|
|
|
Journal of the Korean Ceramic Society 1996;33(3): 251. |
| 중간재가 질화규소/스테인레스 스틸 접합체의 굽힘강도에 미치는 영향 |
| 박상환, 최영화, 김태우1 |
한국과학기술연구원 세라믹스 연구부
1국민대학교 기계공학과 |
| Effect of Interlayers on the Bending Strength of Silicon Nitride/Staineless Steel Joints |
|
|
|
|
|
|
|
| ABSTRACT |
|
The reactions between an active metal brazing alloy and interlayers together with the effects of interlayer type on the interfacial microstructure change were investiaged for silicon nitride/stainless steel joint. The bending strengths were measured for joints with Mo, Cu, Ni interlayer type of different thicknesses. It was found that the interlayer with a low yield strength value is effective to improve the bending strength of the Si3N4/stainless steel joint. The maximum joint strength obtained at room temperature for a laminated Cu/Mo interlayer was about 460 MPa. The combined use of Mo and thin Cu layer was found to be effective in enhancing the bending strength for the Si3N4/S.S.316 joint. |
| Key words:
Active metal brazing, Joining, Interlayer, Joining strength, Interface reaction |
|
|
|
PDF Links 
Full text via DOI 
Download Citation 
