| 세리사이드 분해에 의한 고순도 Al2O3의 제조 및 특성에 관한 연구 |
| 이경희, 박한수1, 송명신1 |
명지대학교 무기재료공학과
1홍익공전 요업과 |
| Fabrication and Characterization of High Purity Al2O3 by Decomposition of Selicite |
|
|
|
|
|
|
|
| ABSTRACT |
|
High purity Al2O3 has been extracted from serlcite of clayminerals, selicite was treated by H2SO4(2N∼18N) solution, NH4OH treatment(PH8.5∼10.0) and metallic impurities such as Fe were removed by NaOH treatment. The tendency of extraction yield of ${alpha}$-Al2O3 have been investigated by relating reaction time, acid concentration. Reaction products were analyzed by DT-TGA, chemical analysis and X-ray diffractometer. Prepared ${alpha}$-Al2O3 power is fired in air at 1400$^{circ}C$, 1600$^{circ}C$ 2hr. The results are as follows; 1. The most suitable extracting conditions of ${alpha}$-Al2O3 from Selicite were N-H2SO4, 120 min acidtreating time. 2. The optimum pH condition was 9.0. 3. Physical properties of sintered Al2O3 bodies were as follows. Relative density is 99%. Water absorption is 0.26%. Rock well hardness is 89. |
|
PDF Links
Full text via DOI 
Download Citation 
