| Home | E-Submission | Sitemap | Login | Contact Us |  
top_img
J. Korean Ceram. Soc. > Volume 47(4); 2010 > Article
Journal of the Korean Ceramic Society 2010;47(4): 319.
doi: https://doi.org/10.4191/kcers.2010.47.4.319
Screen Printable MoSi2 도전성 Paste를 이용한 세라믹 면상 발열체 제조
김배연, 한동빈1, 정철원1
인천대학교 신소재공학과
1(주)위너테크놀로지
Preparation of Screen Printable Conductive MoSi2 Thick Films for Ceramic Sheet Heater
Bae-Yeon Kim, Dong-Bin Han1, Cheol-Weon Jeong1
Department of Materials Science and Engineering, University of Incheon
1Winnertechnology
ABSTRACT
Screen printable $MoSi_2$ paste and its ceramic sheet heater were investigated. $MoSi_2$ powder without $Mo_5Si_3$ second phase, which causes so-called pest phenomena, was synthesized by SHS technique. Over glaze was also developed for preventing pest phenomenon. The maximum temperature of $MoSi_2$ ceramic heater was over $500^{circ}C$. After several heat up and cooling cycle, the $MoSi_2$ heater reveals pest phenomenon. Conductive $MoSi_2$ paste could be used in electronic ceramics, i.e., MLCC, LTCC, HTCC, and etc.
Key words: $MoSi_2$, Sheet heater, Ceramic, Paste, SHS
Editorial Office
Meorijae Bldg., Suite # 403, 76, Bangbae-ro, Seocho-gu, Seoul 06704, Korea
TEL: +82-2-584-0185   FAX: +82-2-586-4582   E-mail: ceramic@kcers.or.kr
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Ceramic Society.                      Developed in M2PI