Ceramic Stereolithography: Additive Manufacturing for 3D Complex Ceramic Structures
Chang-Jun Bae, Arathi Ramachandran, Kyeongwoon Chung, Sujin Park
J. Korean Ceram. Soc. 2017;54(6):470-477. Published online 2017 Nov 29 DOI: https://doi.org/10.4191/kcers.2017.54.6.12
Citations to this article as recorded by 
Vat Photopolymerization versus Conventional Colloidal Processing Methods in Structural Ceramics: Progress, Challenges, and Future Perspectives
Yehua Li, Pengfei Sheng, Lifu Lin, Liang Wang, Donglin Lu, Kunji Lin, Haidong Wu, Shanghua Wu
Additive Manufacturing Frontiers.2024; 3(1): 200110. CrossRef
A study on effects of curing and machining conditions in post-processing of SLA additive manufactured polymer
Yoo Jin Kim, Hyun Na Kim, Do Young Kim
Journal of Manufacturing Processes.2024; 119: 511. CrossRef
Enabling fast debinding of ceramic vat photopolymerization prints with supercritical carbon dioxide as a solvent
Nonna Nurmi, Erkka J. Frankberg, Milla Rinne, Teemu Sandblom, Piie Konnunaho, Erkki Levänen
Additive Manufacturing.2024; 84: 104143. CrossRef
A study on the control of the printing accuracy in alumina parts by ceramic stereolithography
Tao Li, Yuzhen Zhang, Wenyan Duan, Baojie Jin, Zihuan Chen, Shan Li, Bingshan Liu, Gong Wang
Journal of the European Ceramic Society.2024; 44(12): 7149. CrossRef
Effect of different additives and sintering regimes on the optical properties of DLP printed translucent alumina
Michele De Lisi, Francesco Careri, Usama M. Attia, Khamis Essa
Ceramics International.2024; 50(14): 26065. CrossRef
Electrical anisotropy and its mitigation in conductive polymers printed by vat photopolymerization
David Tilve-Martinez, Wilfrid Neri, Nicolas Vukadinovic, Benoit Berton, Alain Pénicaud, Jinkai Yuan, Philippe Poulin
Additive Manufacturing.2024; 86: 104221. CrossRef
A Mask R-CNN based process monitoring system for fabricating high density ceramic parts using photo-polymerization
Seungjae Han, Seung-Kyum Choi, Hae-Jin Choi
Journal of Mechanical Science and Technology.2024; 38(9): 4571. CrossRef
Photopolymerization of Stainless Steel 420 Metal Suspension: Printing System and Process Development of Additive Manufacturing Technology toward High-Volume Production
Hoa Xuan Nguyen, Bibek Poudel, Zhiyuan Qu, Patrick Kwon, Haseung Chung
Journal of Manufacturing and Materials Processing.2024; 8(5): 191. CrossRef
A comprehensive evaluation of vat-photopolymerization resins and alumina slurries for ceramic stereolithography
Tao Li, Haida Chen, Yubei Zhang, Yue Gu, Chuanqi Hu, Shan Li, Bingshan Liu, Wenyan Duan, Gong Wang
Ceramics International.2023; 49(4): 6440. CrossRef
Digital light processing of high-strength hydroxyapatite ceramics: Role of particle size and printing parameters on microstructural defects and mechanical properties
Mehdi Mohammadi, Bartolomeo Coppola, Laura Montanaro, Paola Palmero
Journal of the European Ceramic Society.2023; 43(7): 2761. CrossRef
Digital Light‐Processing (DLP) 3D Printing of Magnesium Phosphate Minerals and Cements
Katharina Holeczek, Uwe Gbureck, Tomasz Jungst, Csaba Gergely, Lisa Galaba, Juliane C. Kade
Advanced Engineering Materials.2023;[Epub] CrossRef
Research progress of the defects and innovations of ceramic vat photopolymerization
Xiangquan Wu, Jiachen Teng, Xiangxu Ji, Chunjie Xu, Dong Ma, Shang Sui, Zhongming Zhang
Additive Manufacturing.2023; 65: 103441. CrossRef
Additive Manufacturing of Bioceramic Implants for Restoration Bone Engineering: Technologies, Advances, and Future Perspectives
Qing Zhou, Xiaonan Su, Jianqin Wu, Xueqin Zhang, Ruyue Su, Lili Ma, Qiang Sun, Rujie He
ACS Biomaterials Science & Engineering.2023; 9(3): 1164. CrossRef
Kinetic stability and rheological properties of photosensitive zirconia suspensions for DLP printing
Patrik Sokola, Michal Kalina, Jiří Smilek, Petr Ptáček, Jitka Krouská, David Salamon, Tomáš Spusta
Ceramics International.2023; 49(11): 18502. CrossRef
Fabrication of 3D structure with heterogeneous compositions using inkjet printing process
Do Kyeong Lee, Kyung Seop Sin, Cheol Shin, Jin-Ho Kim, Kwang-Taek Hwang, Ung-Soo Kim, Sahn Nahm, Kyu-Sung Han
Materials Today Communications.2023; 35: 105753. CrossRef
Micro-flow investigation on laying process in Al2O3 stereolithography forming
Weiwei Wu, Xu Deng, Shuang Ding, Yanjun Zhang, Bing Tang, Binquan Shi
Physics of Fluids.2023;[Epub] CrossRef
Latest Advances in Highly Efficient Dye-Based Photoinitiating Systems for Radical Polymerization
Alicja Balcerak, Janina Kabatc-Borcz, Zbigniew Czech, Marcin Bartkowiak
Polymers.2023; 15(5): 1148. CrossRef
Influence of resin composition on rheology and polymerization kinetics of alumina ceramic suspensions for digital light processing (DLP) additive manufacturing
Mengting Dang, Xuezheng Yue, Guohong Zhou, Song Hu
Ceramics International.2023; 49(12): 20456. CrossRef
Effects of powder properties on the 3D printing of BaTiO3 ceramic resins by stereolithography
Elena Stefan, Terje Didriksen, Tor Olav Sunde, Marie-Laure Fontaine, Henrik Ræder, Per Martin Rørvik
Progress in Additive Manufacturing.2023; 8(6): 1641. CrossRef
Effect of infill strategy on the flexural strength of 3Y-TZP bars fabricated by thermoplastic 3D printing (T3DP)
Ipeknaz Özden, Uwe Scheithauer, Aljaž Iveković, Andraž Kocjan
Open Ceramics.2023; 14: 100367. CrossRef
Additive Manufacturing of Polymer/Bioactive Glass Scaffolds for Regenerative Medicine: A Review
Andrea Martelli, Devis Bellucci, Valeria Cannillo
Polymers.2023; 15(11): 2473. CrossRef
Additive manufacturing of ceramics: Advances, challenges, and outlook
Mehran Dadkhah, Jean-Marc Tulliani, Abdollah Saboori, Luca Iuliano
Journal of the European Ceramic Society.2023; 43(15): 6635. CrossRef
Increasing Printable Solid Loading in Digital Light Processing Using a Bimodal Particle Size Distribution
Antoine P. Delarue, Ian M. McAninch, Amy M. Peterson, Christopher J. Hansen
3D Printing and Additive Manufacturing.2023;[Epub] CrossRef
Shrinkage Compensation and Effect of Building Orientation on Mechanical Properties of Ceramic Stereolithography Parts
Piyush Arora, Khaled G. Mostafa, Emmanuel Russell, Shirin Dehgahi, Sajid Ullah Butt, Didier Talamona, Ahmed Jawad Qureshi
Polymers.2023; 15(19): 3877. CrossRef
3D printing for precision construction of ceramic membranes: Current status, challenges, and prospects
Xianfu Chen, Qirui Cao, Ting Chen, Dongyu Wang, Yiqun Fan, Weihong Xing
Advanced Membranes.2023; 3: 100068. CrossRef
Effect of sintering temperature and low-temperature aging on microstructure and flexural strength of Fe2O3-doped 3Y-TZP ceramics fabricated by stereolithography-based additive manufacturing
Li Wang, Yang Jiao, Lian Yao, Weizhe Tang, Rui Dou
Ceramics International.2023; 49(23): 37307. CrossRef
The influence of long-term hydrothermal and physical ageing on the characteristics of additively manufactured bio-based photopolymer resin
Ariyana Dwiputra Nugraha, Ahmad Mamba’udin, Benny Susanto, Muhammad Kusni, Seno Darmanto, Gil N. Santos, Muhammad Akhsin Muflikhun
Results in Materials.2023; 20: 100499. CrossRef
Fused silica ceramic core based on network-structured zircon design via 3D printing
Qiaolei Li, Jingjing Liang, Yaoli Zhang, Jinguo Li, Yizhou Zhou, Xiaofeng Sun
Scripta Materialia.2022; 208: 114342. CrossRef
3D printing ceramic cores for investment casting of turbine blades, using LCD screen printers: The mixture design and characterisation
Basar Ozkan, Farzaneh Sameni, Floriana Bianchi, Hanifeh Zarezadeh, Sarah Karmel, Daniel S. Engstrøm, Ehsan Sabet
Journal of the European Ceramic Society.2022; 42(2): 658. CrossRef
Additive manufacturing of ceramic alumina/calcium phosphate structures by DLP 3D printing
António V.M. Esteves, Maria Inês Martins, Pedro Soares, M.A. Rodrigues, M.A. Lopes, J.D. Santos
Materials Chemistry and Physics.2022; 276: 125417. CrossRef
A deep insight into the preparation of ceramic bone scaffolds utilizing robocasting technique
Mahdieh Hajian Monfared, Alireza Nemati, Fatemeh Loghman, Melina Ghasemian, Ali Farzin, Nima Beheshtizadeh, Mahmoud Azami
Ceramics International.2022; 48(5): 5939. CrossRef
Effect of boron nitride (BN) on mechanical and dielectric properties of fused silica ceramic composites
Kishore Kumar Kandi, Gurabvaiah Punugupati, Pagidi Madhukar, C. S. P. Rao
Journal of the Korean Ceramic Society.2022; 59(5): 565. CrossRef
Ceramic Stereolithography of Bioactive Glasses: Influence of Resin Composition on Curing Behavior and Green Body Properties
Qirong Chen, Franziska Schmidt, Oliver Görke, Anila Asif, Joachim Weinhold, Erfan Aghaei, Ihtesham ur Rehman, Aleksander Gurlo, Asma Tufail Shah
Biomedicines.2022; 10(2): 395. CrossRef
The Influence of Microstructure on the Flexural Properties of 3D Printed Zirconia Part via Digital Light Processing Technology
Boran Wang, Ali Arab, Jing Xie, Pengwan Chen
Materials.2022; 15(4): 1602. CrossRef
Abrasion Resistance of Plastic Parts Manufactured By 3D Printing
Adelina Hriţuc, Laurenţiu Slătineanu, Alexandru Sover, Andrei Marius Mihalache, Ioan Surugiu, Margareta Coteaţă
Bulletin of the Polytechnic Institute of Iași. Machine constructions Section.2022; 68(1): 35. CrossRef
Additive manufacturing of polymer-derived ceramics: Materials, technologies, properties and potential applications
Raghvendra Pratap Chaudhary, Chithra Parameswaran, Muhammad Idrees, Abolaji Sefiu Rasaki, Changyong Liu, Zhangwei Chen, Paolo Colombo
Progress in Materials Science.2022; 128: 100969. CrossRef
Free-Radical Photopolymerization for Curing Products for Refinish Coatings Market
Aina Ribas-Massonis, Magalí Cicujano, Josep Duran, Emili Besalú, Albert Poater
Polymers.2022; 14(14): 2856. CrossRef
High-Speed Alumina Stereolithography
Fiona Spirrett, Tatsuya Ito, Soshu Kirihara
Applied Sciences.2022; 12(19): 9760. CrossRef
Additive manufacturing of bioactive glass biomaterials
Sara Simorgh, Neda Alasvand, Mahboobe Khodadadi, Faezeh Ghobadi, Maziar Malekzadeh Kebria, Peiman Brouki Milan, Saeid Kargozar, Francesco Baino, Ali Mobasheri, Masoud Mozafari
Methods.2022; 208: 75. CrossRef
Preparation, characterization and coloring mechanism of 3D printed colorful ZrO2 ceramics parts
Jingjing Chang, Bin Zou, Xinfeng Wang, Yang Yu, Qinghua Chen, Guangxu Zhang
Materials Today Communications.2022; 33: 104935. CrossRef
A Comprehensive Evaluation of Vat-Photopolymerization Resins and Alumina Slurries Used in Ceramic Stereolithography
Tao Li, Haida Chen, Yubei Zhang, Yue Gu, Shan Li, Bingshan Liu, Wenyan Duan, Gong Wang
SSRN Electronic Journal .2022;[Epub] CrossRef
Stereolithography as a manufacturing method for a hierarchically porous ZSM-5 zeolite structure with adsorption capabilities
Niina Merilaita, Teemu Vastamäki, Arnold Ismailov, Erkki Levänen, Matti Järveläinen
Ceramics International.2021; 47(8): 10742. CrossRef
A novel device to simply 3D print bulk green ceramic components by stereolithography employing viscous slurries
Oscar Santoliquido, Francesco Camerota, Alice Rosa, Alberto Ortona
Open Ceramics.2021; 5: 100089. CrossRef
Photopolymerization-based additive manufacturing of ceramics: A systematic review
Sefiu Abolaji Rasaki, Dingyu Xiong, Shufeng Xiong, Fang Su, Muhammad Idrees, Zhangwei Chen
Journal of Advanced Ceramics.2021; 10(3): 442. CrossRef
Three-Dimensional Printing of Hydroxyapatite Composites for Biomedical Application
Yanting Han, Qianqian Wei, Pengbo Chang, Kehui Hu, Oseweuba Valentine Okoro, Amin Shavandi, Lei Nie
Crystals.2021; 11(4): 353. CrossRef
Ceramics Processing by Additive Manufacturing
Pradyot Datta, Vamsi K. Balla
Transactions of the Indian National Academy of Engineering.2021; 6(4): 879. CrossRef
Ceramic Molding Based on 3D Printing Technology
Chao Deng, Ting Zhang
Journal of Physics: Conference Series.2021; 1881(3): 032030. CrossRef
Post-Additive Manufacturing Densification and Dimensional Stability of a Commercial Stereolithography Silica Resin
Mingwei Xu, Patrick Conteen, James McGuffin-Cawley
Journal of Materials Engineering and Performance.2021; 30(9): 6703. CrossRef
Structured Alumina Substrates for Environmental Catalysis Produced by Stereolithography
Oscar Santoliquido, Francesco Camerota, Marco Pelanconi, Davide Ferri, Martin Elsener, Panayotis Dimopoulos Eggenschwiler, Alberto Ortona
Applied Sciences.2021; 11(17): 8239. CrossRef
A Dyciandiamine-Based Methacrylate-Epoxy Dual-Cure Blend-System for Stereolithography
Manuel Romeis, Dietmar Drummer
Polymers.2021; 13(18): 3139. CrossRef
Preliminary studies on additive manufacturing of over 95% dense 3Y zirconia parts via digital imaging projection
Letícia Bueno do Amaral, Jorge Luis Faneco Paschoa, Daniel Varela Magalhães, Cesar Renato Foschini, Carlos T. A. Suchicital, Carlos Alberto Fortulan
Journal of the Brazilian Society of Mechanical Sciences and Engineering.2020;[Epub] CrossRef
Polymer meets ceramic: Polymer-driven advancement of ceramic 3D printing technology
Chaenyung Cha
Ceramist.2020; 23(1): 4. CrossRef
A comprehensive review of the photopolymerization of ceramic resins used in stereolithography
Setareh Zakeri, Minnamari Vippola, Erkki Levänen
Additive Manufacturing.2020; 35: 101177. CrossRef
Early hydration and hardening of OPC-CSA blends for cementitious structure of 3D printing
Seonghoon Kim, Taewoo Kim, Buyoung Kim, Hong-dae Kim, Jaeyoung Kim, Heesoo Lee
Advances in Applied Ceramics.2020; 119(7): 393. CrossRef
Modeling and visualization of layered curing conversion profile in ceramic mask projection stereolithography process
Xiangquan Wu, Chunjie Xu, Zhongming Zhang, Can Guo
Ceramics International.2020; 46(16): 25750. CrossRef
Effect of debinding temperature under an argon atmosphere on the microstructure and properties of 3D-printed alumina ceramics
He Li, Yongsheng Liu, Yansong Liu, Qingfeng Zeng, Kehui Hu, Zhigang Lu, Jingjing Liang
Materials Characterization.2020; 168: 110548. CrossRef
An in vitro study on the key features of Poly L-lactic acid/biphasic calcium phosphate scaffolds fabricated via DLP 3D printing for bone grafting
Arvin Bagheri Saed, Amir Hossein Behravesh, Sadegh Hasannia, Behnam Akhoundi, Seyyed Kaveh Hedayati, Fatemeh Gashtasbi
European Polymer Journal.2020; 141: 110057. CrossRef
The prospects for transforming stereolithographic parts from polymer to ceramic by using powder silicium as a photocurable resin filler
Mikhail A. Markov, Vyacheslav V. Vnuk, Evgeny V. Ippolitov, Sergey V. Kamaev, Svetlana A. Cherebylo
The International Journal of Advanced Manufacturing Technology.2020; 111(7-8): 1863. CrossRef
Additive Manufacturing of Various Ceramic Composition Using Inkjet Printing Process
Jae-Hyeon Park, Jung-Hoon Choi, Kwang-Taek Hwang, Jin-Ho Kim
Korean Journal of Materials Research.2020; 30(11): 627. CrossRef
Mechanical and kinetic studies on the refractory fused silica of integrally cored ceramic mold fabricated by additive manufacturing
Chang-Jun Bae, Daniel Kim, John W. Halloran
Journal of the European Ceramic Society.2019; 39(2-3): 618. CrossRef
Additive Manufacturing of ceramic components by Digital Light Processing: A comparison between the “bottom-up” and the “top-down” approaches
Oscar Santoliquido, Paolo Colombo, Alberto Ortona
Journal of the European Ceramic Society.2019; 39(6): 2140. CrossRef
Concentrated suspension-based additive manufacturing – viscosity, packing density, and segregation
Chang-Jun Bae, John W. Halloran
Journal of the European Ceramic Society.2019; 39(14): 4299. CrossRef
Additive manufacturing of architected catalytic ceramic substrates based on triply periodic minimal surfaces
Oraib Al‐Ketan, Marco Pelanconi, Alberto Ortona, Rashid K. Abu Al‐Rub
Journal of the American Ceramic Society.2019; 102(10): 6176. CrossRef
Ink-Jet 3D Printability of Ceramic Ink with Contact Angle Control
Jae-Hyeon Park, Ji-Hyeon Lee, Deug Joong Kim, Kwang-Taek Hwang, Jin-Ho Kim, Kyu-Sung Han
Journal of the Korean Ceramic Society.2019; 56(5): 461. CrossRef
Effect of Photo Initiator Content and Light Exposure Time on the Fabrication of Al2O3 Ceramic by DLP-3D Printing Method
Kyung Min Kim, Hyeondeok Jeong, Yoon Soo Han, Su-Hyun Baek, Young Do Kim, Sung-Soo Ryu
Journal of Korean Powder Metallurgy Institute.2019; 26(4): 327. CrossRef
A segregation model study of suspension-based additive manufacturing
Chang-Jun Bae, John W. Halloran
Journal of the European Ceramic Society.2018; 38(15): 5160. CrossRef
Design of a shape memory composite(SMC) using 4D printing technology
Minkyu Kang, Youngjun Pyo, Joon young Jang, Yunchan Park, Yeon-Ho Son, MyungChan Choi, Joo wan Ha, Young-Wook Chang, Caroline Sunyong Lee
Sensors and Actuators A: Physical.2018; 283: 187. CrossRef
Development of Highly Energy Densified Ink for 3D Printable Batteries
Sujin Park, Nenko S. Nenov, Arathi Ramachandran, Kyeongwoon Chung, Sea Hoon Lee, Jungjoon Yoo, Jeong‐gu Yeo, Chang‐Jun Bae
Energy Technology.2018; 6(10): 2058. CrossRef