|
|
Densification, β → a transformation and nanoindentation studies of SiCw/SiC composites fabricated by spark plasma sintering
Mangesh Lodhe, Amit Bhargav, Awin Wasan, G. Logesh, Rajeev Parmar, M. Balasubramanian
J. Korean Ceram. Soc. 2024;61(4):644-653. Published online April 2, 2024 DOI: https://doi.org/10.1007/s43207-024-00384-y
|
|
|
|
Pressureless sintering of SiC matrix composites reinforced with nano-β-SiC and graphene
Ali Razmjoo, Hamid Reza Baharvandi, Nasser Ehsani
J. Korean Ceram. Soc. 2022;59(5):729-741. Published online May 30, 2022 DOI: https://doi.org/10.1007/s43207-022-00213-0
|
|
|
|
Thermal durability of ytterbium silicate environmental barrier coating prepared by suspension plasma spray
Soo Min Park, Sahn Nahm, Yoon Suk Oh
J. Korean Ceram. Soc. 2021;58(2):192-200. Published online March 31, 2021 DOI: https://doi.org/10.1007/s43207-020-00086-1
|
|
|
|
Effect of SiC Nanorods on Mechanical and Thermal Properties of SiC Composites Fabricated by Chemical Vapor Infiltration
Ho Wook Lee, Daejong Kim, Hyeon-Geun Lee, Weon-Ju Kim, Soon Gil Yoon, Ji Yeon Park
J. Korean Ceram. Soc. 2019;56(5):453-460. Published online September 24, 2019 DOI: https://doi.org/10.4191/kcers.2019.56.5.04
|
|
|
|
Effect of Additive Size on the Densification and Thermal Conductivity of AlN Ceramics with MgO–CaO–Al2O3–SiO2 Additives
Hwa-Jun Lee, Woo-Seok Cho, Hyeong Jun Kim, Hyung-Tae Kim, Sung-Soo Ryu
J. Korean Ceram. Soc. 2017;54(1):43-48. Published online January 31, 2017 DOI: https://doi.org/10.4191/kcers.2017.54.1.06
|
|
|
|
Monte Carlo Simulation of Densification during Liquid-Phase Sintering
Jae Wook Lee
J. Korean Ceram. Soc. 2016;53(3):288-294. Published online May 31, 2016 DOI: https://doi.org/10.4191/kcers.2016.53.3.288
|
|
|
|
Transmission Electron Microscopy Investigation of Hot-pressed ZrB2-SiC with B4C Additive
Seongwon Kim, Jung-Min Chae, Sung-Min Lee, Yoon-Suk Oh, Hyung-Tae Kim, Byung-Koog Jang
|
|
|
|
Effect of Particle Size on Zirconia Gel-Casting Process
In-Woong Kim, Sang-Jin Lee
|
|
|
|
Property of MgO with Different Sintering Temperatures under High Pressures
Jeongho Song, Yunyoung Noh, Ohsung Song
|
|
|
|
Enhanced Sintering Behavior and Electrical Properties of Single Phase BiFeO3 Prepared by Attrition Milling and Conventional Sintering
Nari Jeon, Kyoung-Seok Moon, Dibyranjan Rout, Suk-Joong L. Kang
|
|
|
|
Mullite Formation and Effect in Porcelain Body by Replacing Kaolinite with Pyrophyllite
An-Na Kwak, Geun-Hee Kim, Jae-Hwan Pee, Jong-Young Kim, Woo-Seok Cho, Kyeong-Ja Kim, Jong-Keun Lee
|
|
|
|
Densification and Mechanical Properties of Silicon Nitride Containing Lu2O3-SiO2 Additives
Sea-Hoon Lee, Chun-Rae Jo, Young-Jo Park, Jae-Woong Ko, Hai-Doo Kim
|
|
|
|
Effect of Mullite Generation on the Strength Improvement of Porcelain
Hyo-Sung Choi, Jae-Hwan Pee, Yoo-Jin Kim, Woo-Seok Cho, Kyeong-Ja Kim
|
|
|
|
Microwave-assisted Sintering of Amorphous Powders
Hoi-Kwan Lee, Ki-Min Kim, Man-Kyu Park, Won-Ho Kang
|
|
|
|
Hot Pressing and Spark Plasma Sintering of AlN-SiC-TiB2 Systems using Boron and Carbon Additives
Sea-Hoon Lee, Hai-Doo Kim
|
|
|
|
Investigation of Li Dopant as a Sintering Aid for ScSZ Electrolyte for IT-SOFC
Masashi Mori, Yu Liu, Shuhua Ma, Shin-ichi Hashimoto, Katsuhito Takei
J. Korean Ceram. Soc. 2008;45(12):760 DOI: https://doi.org/10.4191/kcers.2008.45.1.760
|
|
|
|
Effect of the Processing Parameters on the Densification and Strength of 2D SiC Fiber-SiC Matrix Composites Fabricated by Slurry Infiltration and Stacking Process
Kwang-Young Lim, Doo-Hee Jang, Young-Wook Kim, Ji-Yeon Park, Dong-Soo Park
|
|
|
|
Effects of Additive Composition and Content on Sintered Density and Compressive Strength of Cordierite Ceramics
Doo-Hee Jang, Kwang-Young Lim, Young-Wook Kim
|
|
|
|
Manufacture of High Density Graphite Using Coal Tar Pitch
Kwang-Youn Cho, Kyung-Ja Kim, Doh-Hyung Riu, Kwang-Hyun Lim, Jung-Il Kim, In-Cheol Shin, Yun-Soo Lim, Heyok-Jong Joo
|
|
|
|
Microstructure Development of Spark Plasma Sintered Silicon Carbide with Al-B-C
Kyeong-Sik Cho, Kwang-Soon Lee, Hyun-Kwuon Lee, Sang-Jin Lee, Heon-Jin Choi
|
|
|
|
Gas Pressure Sintering, Mechanical Properties and Microstructure of Three Binds of Si3N4 Ceramics
Sung-Soo Ha, Chang-Sam Kim, Deoek-Soo Cheong
|
|
|
|
Liquid Phase Sintered SiC-30 wt% TiC Composites by Spark Plasma Sintering
조경식, 이광순, 송진호, 김진영, 송규호
|
|
|
|
Characteristics of Nickel Aluminate Ceramics Synthesized by Organic (PVA)-Inorganic Solution Technique
이상진, 김주원
|
|
|
|
Densification and Grain Growth Behavior of MgO and TiO2-doped Alumina
Jung-A Lee, Jeong-Joo Kim
|
|
|
|
Densification Behavior of Reaction-Bonded Silicon Nitride Prepared by Using Coarse Si Powders
이주신, 문지훈, 한병동, 박동수, 김해두
|
|
|
|
The Effect of La-silicon Oxynitride on the Densification of ${Si_3}{N_4}$ Ceramics by Spark Plasma Sintering
Kyeong-Sik Cho, Sungjin Kim, Sung-Ho Beak, Heon-Jin Park, June-Gunn Lee
J. Korean Ceram. Soc. 2001;38(8):687
|
|
|
|
Effects of the $V_2$$O_5$ Additive on ${ZnNb_2}{O_6}$ Microwave Dielectrics
Sang-Im Yoo, Dong-Wan Kim, Sung-Hun Wee, Kug-Sun Hong
J. Korean Ceram. Soc. 2001;38(4):308
|
|
|
|
Effects of the Sintering Atmosphere and Ni Content on the Liquid-phase Sintering of $TiB_2$-Ni
Suk-Joong L. Kang , Jin-Chul Baung, Yeon-Gyu Park, Eul-Son Kang, Yong-Kee Baek, Sug-Woo Jung
J. Korean Ceram. Soc. 2001;38(3):207
|
|
|
|
Properties of YIG Thick Films Prepared by Screen-Printing
이태경, 남중희, 오재희, 이재춘, 최승철
J. Korean Ceram. Soc. 2000;37(10):1001
|
|
|
|
Effects of MgO Addition on Densification and Microstructural Development during Liquid-Phase Sintering of Alumina-Anorthite System
김호양, 이정아, 김정주
J. Korean Ceram. Soc. 1999;36(11):1243
|
|