Sintered-reaction Bonded Silicon Nitride Densified by a Gas Pressure Sintering Process - Effects of Rare Earth Oxide Sintering Additives
Sea-Hoon Lee, Jae-Woong Ko, Young-Jo Park, Hai-Doo Kim, Hua-Tay Lin, Paul Becher
J. Korean Ceram. Soc. 2012;49(4):318 DOI: https://doi.org/10.4191/kcers.2012.49.4.318
Citations to this article as recorded by 
On the fabrication and mechanical properties of Si3N4 ceramics with low content sintering additives
Luchao Sun, Yandong Tang, Yang Cui, Tiefeng Du, Cui Zhou, Beiyue Ma, Jingyang Wang
International Journal of Applied Ceramic Technology.2023; 20(2): 1269. CrossRef
Fabrication of Si3N4 ceramics by post-reaction sintering using Si–Y2O3–Al2O3 nanocomposite particles prepared by mechanical treatment
Kwangjin Jeong, Junichi Tatami, Motoyuki Iijima, Takuma Takahashi
Ceramics International.2016; 42(10): 11554. CrossRef
Densification of Reaction Bonded Silicon Nitride with the Addition of Fine Si Powder - Effects on the Sinterability and Mechanical Properties
Sea-Hoon Lee, Chun-Rae Cho, Young-Jo Park, Jae-Woong Ko, Hai-Doo Kim, Hua-Tay Lin, Paul Becher
Journal of the Korean Ceramic Society.2013; 50(3): 218. CrossRef